How to get Amazon Echo to work with BT Home Hub


Amazon Echo has launched in the UK, but many BT customers are complaining that the setup procedure for the smart wireless speaker, which should be relatively straightforward, is running into issues when trying to connect to a wireless network created by the BT Home Hub router.

If you’re having trouble connecting the Amazon Echo or Echo Dot to your BT Home Hub’s Wi-Fi, then read on to find out what you can do to fix those problems and get it up and running.

Separate the 2.4GHz and 5GHz bands

The BT Home Hub is a dual band router, which means it creates two Wi-Fi networks – one on the 2.4GHz band, and one on the 5GHz band. Although separate, these networks have the same name and this could be confusing the Amazon Echo.

Some BT customers have found that separating the bands, and keeping Amazon Echo on the 2.4GHz band, fixes the problem.

How to get Amazon Echo to work with BT Home Hub

To do this you need to give each wireless network a different name (also known as an SSID). Open an internet browser on a PC, laptop or tablet connected to your home network and type in 182.168.1.254 into the address bar. This lets you gain access to a menu where you can tweak your router settings.

Click ‘Advanced Settings’ from the menu that appears, then select ‘Wireless’. You’ll need to enter in your admin password – this can be found on the settings card that’s stuck to the back of the Hub.

On the new page that appears click on the ‘Separate bands’ switch to set it to ‘On’. If you have a BT Home Hub 4 or BT Home Hub 5, then you need to click on ‘5GHz Wireless’ first, then set ‘Sync with 2.4GHz’ to ‘No’ and rename the Wireless SSID.

Click ‘Apply’ or ‘Save’ to save the changes.

Manually enter your network details into Amazon Echo

If that doesn’t work, then some people have found that entering the details of their wireless network manually helped fix the issue.

In the Echo’s Wireless Network setup screen in the app, type in the name of your BT Home Hub network and the password you use to allow devices to connect to the network.

Next, click on ‘Advanced settings’ and select the security setting to use. If you have the BT Home Hub 5 it is WPA2 for both 2.4GHz and 5GHz networks. The BT Home Hub 4 uses WPA (Auto) for 2.4GHz and WPA2 for 5GHz and the BT Home Hub 3 uses WAP Auto for 2.4GHz (it doesn’t have a 5GHz band).

Now enter in the following details in the correct text boxes:

IP address: 192.168.1.2

Router: 192.168.1.254

Subnet Mask: 255.255.255.0

DNS 1: 62.6.40.178

DNS 2: 62.6.40.162

Your Echo should now connect to your network.



Source link

Leave a Reply